Water Cannon hot water 4000psi pressure washer

 Step-by-Step guide on safely using a Water Cannon hot water 4000psi pressure washer for historic building restoration applications:

Materials and Tools Needed:

- Water Cannon hot water 4000psi pressure washer
- Protective clothing, safety glasses, and gloves
- Scaffolding or lift (if needed)
- Extension wand (if needed)

Steps:

1. Safety First: Always wear protective clothes, including safety glasses and gloves, when operating a pressure washer. The high-pressure jet can cause serious injuries.

2. Prepare the Pressure Washer: Make sure to read the operator’s manual before you start the pressure washer. Understand the correct operation, the controls, and safety measures.

3.  Inspect the Building: It's crucial to evaluate the building's condition before pressure washing. Look for any signs of weak masonry, cracks, or loose bricks. Areas where mortar is crumbling should also be identified. These zones might need gentler pressure or handheld cleaning.

4. Get Permission: Historic buildings usually fall under specific protection laws. Always check the laws and get necessary permissions before you begin cleaning.

5. Test on a Small Area: Use the 4000psi pressure washer on a small, less noticeable area first to make sure it doesn't cause any damage.

6.  Avoid Direct Angles: Never direct the pressure washer jet perpendicular to the surface. Instead, aim at a 45-degree angle. This rule helps to prevent the displacement of mortar and ensures less abrasive interaction with the surface.

7. Maintain a Safe Distance: Always maintain a safe distance from the building. Aim to keep about six to twelve inches away from the wall. Be sure to step back if the pressure seems too intense to prevent damage. 

8. Use an Extension Wand: For high areas, use an extension wand instead of a ladder when possible. It can be dangerous to operate a pressure washer from a ladder due to the force of the back spray.

9. Work from Top to Bottom: Start at the top of the building and work your way down. This method allows the dirty water to run down the wall, so you're not spraying over previously cleaned areas which allows for an even clean.

10. Continuous Movement: Keep the spray moving. If you keep it in one area for too long, you could cause damage especially considering the high PSI of the Water Cannon hot water pressure washer.

11. Use Hot Water Carefully: Hot water can be very effective, but it must be used carefully on delicate surfaces. It can help to dissolve tough grime and can make the cleaning process quicker.  At the end of this process, your historic building should be clean, preserving its architectural integrity. Remember, when in doubt, always seek professional help. Historic buildings are sensitive, and incorrect pressure washing could lead to irreversible damage.

Call us at 833.400.0774 

Español: 800.917.9274

How to Use a Mosmatic Duct Cleaner:

 Industrial pressure washing operations often require specialized equipment such as the Mosmatic Duct Cleaner for cost-effective, thorough cleaning. This device is precisely engineered to clean ducts, trash-chutes, vents, restaurant hoods, tanks, and more. Let's walk through a step-by-step tutorial on how to use it.

Materials Needed:
- Mosmatic Duct Cleaner
- Industrial Water Cannon pressure washer
- Protective clothing (gloves, safety glasses, etc.)

Steps:
1. **Prepare Your Equipment**: Ensure your Mosmatic Duct Cleaner is clean and free of damage or debris. Connect it to your industrial pressure washer as per the manufacturer’s instructions. Typically, it involves connecting the high-pressure hose to the duct cleaner inlet.

2. **Wear Protective Gear**: Safety is paramount when handling pressure washers and duct cleaners. Wear protective glasses, gloves, and waterproof clothing to protect yourself from potential back-splash.

3. **Prepare the Duct**: Before starting with the cleaning process, prepare your duct. This may include removing any large debris and ensuring the duct is ready for water inflow.

4. **Start the Pressure Washer & Insert the Duct Cleaner**: Start your pressure washer, ensuring it operates at the recommended pressure for your specific model of Mosmatic Duct Cleaner. Slowly insert the duct cleaner into the duct, trash-chute, or vent you’re cleaning.

5. **Operate the Duct Cleaner**: Once the nozzle assembly is inside, the high-pressure water rotating arm will begin to spin, effectively cleaning every angle of the duct. Move the cleaner in and out to ensure thorough cleaning.

6. **Repeat if Necessary**: Depending on the level of dirt and type of residue, you may need to repeat the process, potentially with a different type of cleaner.

**Common Applications in Industrial Pressure Washing**:

Mosmatic Duct Cleaners have diverse applications in industrial pressure washing business due to their robust capabilities and flexible use. They are most commonly used to clean:

- **Ducts and Vents**: Mosmatic Duct Cleaners effortlessly remove built-up dust, dirt, mold, and contaminants in industrial HVAC or kitchen exhaust systems.

- **Trash Chutes**: These cleaners can be utilized to cleanse trash chutes in commercial buildings, quickly removing trash residues and odors.

- **Restaurant Hoods & Tanks**: They effectively clean hoods in commercial kitchens that accumulate greasy build-ups, and tanks that may hold any kind of residues.

- **Pipes**: In certain industries, Mosmatic Duct Cleaners can be used to clean interior surfaces of pipes, ensuring effective operation.
By providing an efficient and effective method for cleaning hard-to-reach ducts and chutes, the Mosmatic Duct Cleaner is a vital tool in the arsenal of any industrial pressure washing business. Always remember to refer to your user manual for specific instructions on usage and maintenance.

Call us at 833.400.0774 - 800.917-9274

As Simple as color coding... NOZZLES

Each nozzle has been designed for a cleaning purpose to deliver precise results.

Call us or visit us for more details on our top quality a diverse selection of parts and accessories 

833.400.0774 - Esp: 800.917.9274

O Degree - RED

Removal of layers of heavy or solidified mud on agricultural or on garden equipment.

15 Degree
YELLOW

Removes paint on wood, masonry or metal, grease and dirt from equipment, stains and mold, rust on aluminum.

25 Degree
GREEN

General cleaning, mud and dirt, roof, gutters, downspouts, mold stains, algae and bacteria due to accumulation in swimming pools, Rinsing surfaces for work preparation.

40 Degree
WHITE

Light cleaning, washing and rinsing of cars and boats. Roofs, windows, patios and access roads.

BLACK

Chemical Injector

how to adjust and properly set a VRT 3 unloader valve

Hear is a step-by-step tutorial on how to adjust and properly set a VRT 3 unloader valve for a Water Cannon pressure washer:
1. **Gather Necessary Tools**: Commonly, an adjustable wrench and a flat head screwdriver and an inline glycerin filled pressure gauge rated for 4500psi or more would be all you need.

2. **Safety First**: Before working with any equipment, especially one pressurized, it is essential to first unplug or turn it off. Disconnect your pressure washer from the power supply if electric or disconnect the spark plug if gasoline powered for safety reasons to ensure that it doesn't accidentally turn on while you're working.

3. **Identify the Unloader Valve**: Locate the VRT 3 unloader valve on your  Water Cannon pressure washer. It is usually positioned on the side of the pressure washer unit and is typically a knob, bolt or a nut that can be turned by hand or requires a tool.

4. **Preparation for Adjustment**: Before starting the adjustment, open the pressure adjusting knob by rotating it counter-clockwise. This will minimize the spring tension allowing for easier adjustment later on.

5. **Setting the Pressure**: To increase the pressure, turn the unloader valve clockwise. To decrease the pressure, turn the unloader screw counterclockwise. Remember to make small adjustments then test the pressure before adjusting it further.

6. **Testing Adjustments**: Once you've made your adjustments, test the pressure washer by running water through it without turning it on. Check the pressure levels carefully by viewing the inline pressure gauge. 

7. **Fine Tuning**: Models may vary, but usually adjustment occurs by a black knob on top of the valve which can be screwed in for less flow (increased pressure) and screwed out for more flow (decreased pressure). 

8. **Lock Changes**: If your unloader has a locking nut, tighten it after you reach the desired setting. 

9. **Re-test the unit**: Re-test the unit to ensure it is functioning at the desired pressure.

Please note: This guide provided is basic and the exact steps could slightly vary based on the specific model of your Water Cannon pressure washer. Always follow the manufacturer’s instructions and safety guidelines when adjusting the unloader valve. If the pressure washer still isn’t operating as it should, you may need to consult a professional for further assistance. 

Phone: 833.400.0774 - esp: 800.917.9274

10,000PSI Gauge - 3000PSI -  1000PSI -  5000PSI -  6000PSI

HIGH GPM

 

By having technical advice, you will be able to obtain the best option in cleaning machinery, which implies a correct choice in GPM and PSI.

GPM = Gallons per minute, this means that you will obtain the necessary flow rate for the job,You must take into account the level of grime, dirt mold or barnacles you need this flow rate for

If you choose a high flow rate you will get a job done in less time.

Advantages of a high GPM: speed on large surfaces, keep in mind that a high GPM can cause damage to fragile surfaces, such as windows, surfaces with fragile covers.

With a proper combination of PSI – and accessories the GPM will be your best alloy.

Call us for more info at: 833.400.0774

Español: 800.917.9274

new addition - Pressure Washers

 

Visit our new addition of pressure washers

2700PSI 7HP Lifan - 3GPM-Triplex Pump

2700PSI Honda GX200 - 3GPM - Triplex Pump

2700PSI Honda GX200 - 3GPM - General Pump

2700PSI Honda GX200 - 3GPM - Annovi Reverberi

4000PSI Honda GX200 - 4GPM - General Pump

Quick Connects - Couplers And Plugs

 

Our Extensive selection of quick connects, Plugs, & Couplers are offered in a variety of sizes and metals. With the following imagines, we anticipate an easy process to determine the differences to help you identify the correct Connectors.

We are always available by phone if further assistance is needed.

833.400.0774 or 800.917.9274

examples: