will the unloader have the pressure preset?

 

ZWD4040 Comet Pump Triplex 4 GPM 4000 PSI - includes an unloader, thermal relief valve, quick connect, chemical injector siphon hose, and garden hose inlet with stainless steel filter - 1 inch hollow shaft and universal fits Honda, Kohler and Lifan engines.

Question; When I receive my pump will the unloader have the pressure preset?

• The unloader is not set exactly. 
• The factory uses a default setting that is close to the performance of the 4000psi pump.

• It is not a dependable default setting. 
• Please always check the oil level and start the unloader in the counter-clockwise setting until you can test the system. 

• You can increase the pressure by manually turning the adjustment knob clockwise until you reach the desired load on the engine. 
• Do not exceed 4200psi. 

PDF VTR3 Unloader Click Here

Call us: 800.333.9274

Espanol: 800.917.9274

The unloader is on backwards which caused the failure.

• Unloader is backwards which caused the failure, This also poses a risk to the operator.

• There is no bypass 

Caution when installing a regulator, if not installed correctly it can cause valve covers to explode and damage the valves.

Phone: 800.333.9274

Español: 800.917.9274

Water cavitation on a pressure washer

 Water cavitation on a pressure washer is the process of gas bubbles forming and collapsing inside the pump, which can damage the pump and cause premature failure. 

Cavitation occurs when the pump's inlet doesn't supply enough fluid to match the amount being discharged from the outlet. This can happen when the net positive suction head (NPSHR) needed by the pump isn't available. The NPSHA is the minimum pressure required at the suction port to prevent the liquid from boiling or evaporating. 

To prevent cavitation, you can: 

• Ensure the pressure applied at the suction port is greater than the liquid's vapor pressure 
• Match the pump specifications to the fluid and system requirements

chemical injector is not working

 The choices are adjustable or fixed.

Then look at the threads most are threaded on both sides, Male x male are the most common.

Usually they fail when the soap is left to dry inside the mechanism. Most of the time they can be resurrected by disassembling and cleaning off the dried soap and then reassembling.

The spring inside can be easily lost when you take it apart.

It’s a good practice to rinse with clean water after each use to avoid the soap build up that dries and causes the spring, o-ring and ball to seize up. 

Call us at: 800.333.9274

OEM Replacement Pumps

 

OEM Replacement Pumps

For those seeking original equipment manufacturer (OEM) replacement pumps, we offer a variety of options to ensure compatibility and quality. Discover pumps from popular brands like:

·  Easy-Kleen: Known for their high-quality and precise fit.

·  AAA Pump: Offering reliable and efficient replacements.

·  Husqvarna: Providing top-notch performance and durability.

Features and Benefits:

·  Compatibility: Ensures a perfect fit with your pressure washer.

·  Quality Assurance: Meets or exceeds original specifications.

Reliable Performance: Trusted for consistent and efficient operation

Disclaimer: AllPressureWashers.com is not affiliated with the manufacturers or brands listed on this site. All trademarks, service marks, and company names are the property of their respective owners and are used solely for identification purposes.

833.400.0774
800.917.9274

Unloader Valves

 

Unloader valves are essential components that regulate pressure and protect the pump from damage. Explore our selection from trusted brands including:

• Landa: Offering high-quality and reliable valves.
• Excell: Known for their efficient and durable designs.
• Troy-Bilt: Providing dependable and effective solutions.

Features and Benefits:

• Pressure Regulation: Ensures optimal performance.
• Pump Protection: Prevents damage and extends lifespan.
• Reliable Performance: Essential for maintaining your pressure washer.

Disclaimer: AllPressureWashers.com is not affiliated with the manufacturers or brands listed on this site. All trademarks, service marks, and company names are the property of their respective owners and are used solely for identification purposes.

833.400.0774

800.917.9274

Direct Drive Pumps - 4 gpm - 4200 psi

Direct Drive Pumps - 4 gpm - 4200 psi - $245.00 

Direct drive pumps are designed for efficiency and low maintenance, featuring a direct connection between the pump and motor. Discover top-notch replacements from:

• Briggs & Stratton: Known for their reliable and high-performance pumps.
• Pressure Pro: Providing efficient and durable solutions.
• Water Cannon: Offering powerful and maintenance-friendly designs.

Features and Benefits:

• Direct Drive Design: Ensures increased efficiency.
• Lower Maintenance: Reduces downtime and repair costs.
• High Performance: Reliable and effective for various applications.

Disclaimer: AllPressureWashers.com is not affiliated with the manufacturers or brands listed on this site. All trademarks, service marks, and company names are the property of their respective owners and are used solely for identification purposes.

Heating Coil

 

Water Cannon hot water pressure washers feature a unique heating coil that are made with State of the Art machinery and technology. This starts with custom ordered lengths of coil pipe that can be up to twice as long as other brands, reducing the need for extra welds.

 Our fusion welding process achieves 100% pipe penetration for stronger pipe to pipe cohesion. The pipe is then drawn through a state of the art, 11 axis pipe maneuvering coil rolling machine that will provide zero bend restrictions. The whole coil can be rolled at one time, including the "pancakes" that are structurally braced with steel rod to eliminate vibration.

 For additional structural support each layer is welded to the next to totally do away with friction and pipe wear.

It is this unique coil design with increased surface area allows for faster heat transfer and also prevents hot-spots, since there are no bend restrictions. 

Thus, the water is heated evenly and quicker than most competitor models. Additionally, Water Cannon units have been paired with the best factory recommended burner to efficiently control fuel combustion that allows for a greater number of BTUs than other pressure washers, resulting in faster heating times with better heat transfer.

See more: click here 

AXIAL PUMPS

 

Axial Cam Pumps 

Axial cam pumps are known for their compact design and lightweight construction, making them ideal for residential use. Our collection includes replacement pumps from renowned brands such as:

·  AR Blue Clean: Offering reliable performance and durability.

·  Simpson: Known for their high-quality and user-friendly designs.

·  Generac: Providing efficient and powerful cleaning solutions.

Features and Benefits:

·  Compact Design: Easy to handle and store.

·  Lightweight: Portable and convenient for everyday use.

·  Residential Use: Perfect for home cleaning tasks.

Disclaimer: AllPressureWashers.com is not affiliated with the manufacturers or brands listed on this site. All trademarks, service marks, and company names are the property of their respective owners and are used solely for identification purposes.

Triplex Plunger Pumps blog

 

Triplex Plunger Pumps

For those seeking commercial-grade performance, our triplex plunger pumps deliver exceptional durability and high-pressure output. Explore our range from leading brands including:

• Annovi Reverberi (AR): Renowned for their robust and reliable pumps.
• Comet Pumps: Offering superior performance and longevity.
• General Pump: Trusted for their high efficiency and power.

Features and Benefits:

• Durability: Built to withstand heavy-duty use.
• High Pressure Output: Ideal for commercial applications.
• Commercial-Grade Performance: Suitable for demanding tasks.

Disclaimer: AllPressureWashers.com is not affiliated with the manufacturers or brands listed on this site. All trademarks, service marks, and company names are the property of their respective owners and are used solely for identification purposes.

Belt Drive Pumps

$598 Delivered 

Belt drive pumps are favored for their reduced vibration, longer lifespan, and quieter operation. Check out our premium selection from brands such as:

·  Comet: Known for their robust and long-lasting pumps.

·  Mi-T-M: Offering high-quality and efficient designs.

·  Hotsy: Providing reliable and quiet performance.

Features and Benefits:

·  Reduced Vibration: Ensures smoother operation.

·  Longer Lifespan: Built for extended durability.

·  Quieter Operation: Ideal for noise-sensitive environments.

Shop our Belt Drive Pumps Selection Click Here

Disclaimer: 

AllPressureWashers.com is not affiliated with the manufacturers or brands listed on this site. All trademarks, service marks, and company names are the property of their respective owners and are used solely for identification purposes.

the pump has been over-pressurized

 

-What you show as leaking means the pump has been over-pressurized and is probably not repairable. -

-Over-pressurized means the adjustable knob on the top was turned clockwise beyond the pump's capacity.

-Specifically which model number do you have, or horsepower of the motor or label on the top of the pump.

📲Call us At: 833.400.0774

Hot Water Trailer 3000PSI 16GPM Mounted Sewer Jetter

 

Water Cannon’s 16 gpm - 3000 psi (48,000Effective Cleaning Units) hot water sewer drain cleaning machines are highly effective tools that can be used in a county school district for various commercial plumbing applications. With the system assembled on a nicely equipped dual-axle over the road D.O.T. approved trailer, convenient key-start and a 500 gallon water reservoir tank this hot water jetter is self-contained, ready to clear up the problems and keep things running smoothly down the drain.

Here are some of the common uses: 

·  Clearing Clogged Drains: These machines are specifically designed to remove tough clogs and blockages in sewer drains. "Best Practices" use high-pressure hot water jets to break up and flush away debris, grease, and sludge, ensuring efficient drainage in school facilities.

·  Preventive Maintenance: Regular maintenance of sewer drains is crucial to prevent costly and disruptive plumbing issues. With a 16 gpm 3000 psi and adjustable hot water up to 200 degrees F and Pulsation-on-demand. These drain cleaning machines, the school district can proactively clean and inspect sewer lines, identifying potential problems before they escalate.

·  Removing Tree Roots: Tree roots can infiltrate sewer lines, causing blockages and damage. These powerful machines can effectively cut and clear tree roots, restoring proper flow in the drainage system. Specialty nozzles are available with features that help break up tree roots and other obstacles.

·  Cleaning Grease Traps: Commercial kitchens in schools often have grease traps that require regular cleaning with hot water. The high-pressure hot water jets of these drain cleaning machines can effectively remove grease buildup, preventing clogs and maintaining proper functioning of the traps. Grease traps can generate flammable and toxic gases over time. These gases can include methane (natural gas), hydrogen sulfide, carbon monoxide, carbon dioxide, and/or other gases depending on the greases, oils, and fats found in the grease traps. https://www.osha.gov/sites/default/files/publications/OSHA3986.pdf 

·  Emergency Services: In the event of a sewer line backup or severe clog, a 16 gpm 3000 psi drain cleaning machine can quickly address the issue, minimizing disruption to school operations and ensuring a safe and sanitary environment for students and staff. Water Cannon sewer drain cleaning machines installed on a D.O.T. approved trailers are essential tools for maintaining the plumbing infrastructure in a county school district, ensuring efficient drainage, and preventing costly plumbing emergencies.

·  Pressure Washing: When it is time to clean up, the Water Cannon Jetter doubles as a pressure washer system and comes complete with all of the conversion accessories. 

 

☎ 833.400.0774 - 800.917.9274

remember; Do not make the following mistakes when using a pressure washer:

 

Using a pressure washer can be dangerous if proper safety precautions are not taken. Here are a few examples of "dumb" ways someone could get hurt while using a pressure washer:

• Pointing the nozzle at someone: The high-pressure water stream can cause serious injury or even death if it hits someone in the face or chest.

• Not wearing proper eye and ear protection: The high-pressure water stream can cause damage to the eyes and ears if proper protection is not worn.

• Not properly securing the hose: If the hose is not properly secured, it can whip around and cause injury to the person using the pressure washer or to others nearby.

• Using a pressure washer on an unstable surface: If the person using the pressure washer is standing on an unstable surface, they could slip or fall, causing injury.

• Not properly maintaining the pressure washer: If the pressure washer is not properly maintained, it could malfunction and cause injury.

• Using a pressure washer on electrical equipment, or near electrical sources, without making sure everything is properly grounded and isolated.

• Using the pressure washer for cleaning chemicals or flammable liquids, which can cause an explosion or fire hazard.

833.400.0774 

Espanol: 800.917.9274

Using a pressure washer

 

Using a pressure washer can be dangerous if proper safety precautions are not taken. Here are a few examples of "dumb" ways someone could get hurt while using a pressure washer:

• Pointing the nozzle at someone: The high-pressure water stream can cause serious injury or even death if it hits someone in the face or chest.

• Not wearing proper eye and ear protection: The high-pressure water stream can cause damage to the eyes and ears if proper protection is not worn.

• Not properly securing the hose: If the hose is not properly secured, it can whip around and cause injury to the person using the pressure washer or to others nearby.

• Using a pressure washer on an unstable surface: If the person using the pressure washer is standing on an unstable surface, they could slip or fall, causing injury.

• Not properly maintaining the pressure washer: If the pressure washer is not properly maintained, it could malfunction and cause injury.

• Using a pressure washer on electrical equipment, or near electrical sources, without making sure everything is properly grounded and isolated.

• Using the pressure washer for cleaning chemicals or flammable liquids, which can cause an explosion or fire hazard.

Phone: 833.400.0774
Español: 800.917.9274

Water Cannon Pressure Washers

A Water Cannon pressure washer typically has several features that enhance its functionality and versatility. Some common features include:

1. Adjustable Spray Pattern: The water cannon usually allows you to adjust the spray pattern, ranging from a narrow, concentrated stream to a wider fan-like spray. This adjustability allows you to tailor the water flow to different cleaning tasks.

2. Flow Control: Many Models have a flow control feature that allows you to regulate the water flow rate. This is useful for controlling the intensity of the water stream based on the cleaning requirements.

3. Pressure Adjustment: Most offer pressure adjustment capabilities, enabling you to increase or decrease the water pressure as needed. This feature is particularly handy when dealing with delicate surfaces or when a more powerful stream is required for tough cleaning jobs.

4. Quick-Connect System: To easily attach and detach the Water Cannon from the pressure washer wand or hose a quick-connect system is often incorporated. This allows for convenient and swift changes between different nozzles or attachments.

5. Ergonomic Design: Water Cannons are designed with ergonomics in mind, providing a comfortable grip and easy maneuverability. This ensures that you can comfortably handle the water cannon for extended periods without fatigue.

6. Durable Construction: Given the demanding nature of pressure washing, Water Cannon's are typically built with durable materials such as stainless steel, aircraft aluminum or heavy-duty guage steel. This ensures longevity and withstands the high pressures and harsh conditions associated with pressure washing.

7. Safety Features: Some models may include safety features such as a trigger lock to prevent accidental spraying or a muffler heat guard to protect your hands during use.

It's important to note that the specific features may vary depending on the type and model of the Water Cannon. Visit

833.400.0774