Hot Water Hoses

                                     

When it comes to choosing a hose for a hot water pressure washer, there are a few key factors to consider. First, the hose should be able to withstand high temperatures, as hot water pressure washers typically produce water that is over 200 degrees Fahrenheit. Additionally, the hose should be made of a durable material that is resistant to abrasion and kinking, as these factors can reduce the flow of water and cause the hose to fail. Finally, the hose should be of a suitable size and length to meet the needs of the pressure washer and the job at hand. 

Some of the best hoses for hot water pressure washers are available from the Water Cannon Projet series. 

Phone: 833.400.0774
https://www.watercannon.com/category/472/6000-psi

#highpressurewasher #powerwashing #hotwatercleaning

Read More

HOT-WATER GENERATOR

 

A hot water pressure washer is more effective in cleaning for a few reasons. First, hot water can effectively dissolve and remove many types of dirt and grime that cold water alone may not be able to remove. Second, hot water can help to loosen and break up tough stains and grime, making them easier to remove. Finally, hot water can kill bacteria and germs on surfaces, providing a more thorough clean.

This is especially important in applications where sanitization is a concern, such as in the food service industry. Overall, the use of hot water in a pressure washer can provide a more efficient and effective cleaning experience.

Phone: 833.400.0774

https://www.watercannon.com/category/375/hot-water-generator

Read More

Surface Cleaner - Caster

 There are a few reasons why some surface cleaners might require caster wheels and others might not. The main reason is that some surface cleaners are designed to be used on flat, smooth surfaces, while others are designed to be used on uneven or rough surfaces.

Surface cleaners that are designed for use on flat, smooth surfaces are usually lightweight and easy to maneuver, so they do not need caster wheels to help them move around. However, surface cleaners that are designed for use on uneven or rough surfaces are often heavier and more difficult to maneuver, so they might need caster wheels to help them move around more easily.

Another reason why some surface cleaners might require caster wheels is that they are designed to clean large areas quickly and efficiently. These surface cleaners often have a wide cleaning head and multiple spray nozzles that allow them to cover a large area in a short amount of time. In order to move these surface cleaners around easily, they often have caster wheels that allow them to be pushed or pulled across the surface being cleaned.

Finally, some surface cleaners might require caster wheels for safety reasons. If a surface cleaner is heavy and difficult to maneuver, it can be dangerous to try to push or pull it around without the help of caster wheels. Caster wheels can make it easier to control the movement of the surface cleaner, which can help prevent accidents and injuries.

Overall, the need for caster wheels on a surface cleaner will depend on the design of the cleaner, the type of surfaces it is intended to be used on, and the size of the area that it is meant to clean. Surface cleaners that are designed for use on flat, smooth surfaces and are intended to clean small areas might not require caster wheels, while surface cleaners that are designed for use on rough or uneven surfaces and are intended to clean large areas quickly might need caster wheels to make them easier to use.

Phone: 833.400.0774

 

 

Read More

Water Blaster - Pressure Washers

 

Treat yourself to a new Simpson Water Shotgun pressure washer to tackle all the things you can use a washer for deck cleaning, wood restoration, paint preparation, graffiti removal and general maintenance.

Driven by the popular and powerful Honda or Vanguard engine, Honda pressure washer has a 4 GPM flow rate and provides pressure up to 7000 PSI. The engine produces abundant power and will cooperate with ease when combining it with the World-Famous AAA and Comet Triplex Plunger pump, with all of these pressure washer parts offering excellent manufacturers' warranties.

Our all-lightweight aircraft grade aluminum frame has a 10-year warranty and boasts easy maneuverability good balance and has no welds to fracture or break on our V-Belt driven washers. The cool deck frame helps dissipate excess heat from the engine and pump giving your components added longevity making this purchase a lasting investment. Two 13 inch oversized fully pneumatic air tires have twin stainless steel ball bearings mounted on a cold-rolled steel axle. The two shock-absorbing feet provide a stable platform and reduce vibration and eliminate "Walking" during operation. The two handles protect your Simpson Pressure Washer during transportation and ensure easy loading or unloading from the jobsite.

The Super Pro Roll Cage Models feature a fully protected frame, 10 Inch Premium Pneumatic tires for any jobsite or rental application. Quality Comet Triplex plunger pumps are compact gear-driven, have an unprecedented 7 year warranty and boast a long-life at a low RPM.

The unit is delivered to you complete and ready to use when combined with the included attachment kit, which features a 50-foot Gray non-marking industrial duty high pressure hose, trigger gun, wand and nozzles.

Phone: 833.400.0774
Espanol: 800.917.9274

Read More

ADJUSTING THE PRESSURE-Activated UNLOADER

                  

  pulsar/vrt3 and all pressure trapped

1. the adjusting nut is tightened to increase bypass pressure and loosened to decrease bypass pressure.

2. start with the machine off and the adjusting nut loosened (no tension on the spring). make sure the spray tip is correct for the volume (gpm) and operating pressure (psi).

3. install a pressure guage on pump discharge side of the pump head, or at the outlet where the pressure washer hose attaches.

4. start the machine with the trigger gun closed, the unit will bypass all the water flow from the unloader valve to the pump inlet.

5. with the machine running and the trigger gun now held open, adjust the unloader adjusting nut until the machine reaches the correct operating pressure per the machine specifications            (gpm and psi).

6. pull and then release the trigger gun several times, watching the guage and determine the spike pressure is no more than 200 psi above the operating pressure. adjust as necessary. tighten the lock nut to make the adjustment permanent.

7. make sure the spray tip is correct. remember to adjust the pressure spike to no more than 200 psi over the operating pressure.

8. tip changes – a green spray tip only indicates that it is a 25 degree tip. the tip size is the importan indicator. a 5.6 gpm machine at 35oo psi requires a # 6 tip size. the tip size is laser cut below the color coded plastic nozzle protector. a 2506 is correct for 5.6gpm@3500psi. Phone:833.400.0774 español: 800.917.9274 

Read More

Hot-Water-Powerful-Commercial-132 Degree-Portable

 Water Cannon Exclusive Hot Water Pressure Washers deliver 4.0GPM and 4000PSI and a 132 degree temperature rise, this pressure washing unit will get the job done. Each model comes with all the necessary accessories for you to get started right away. To protect your investment there is a 3 Year Warranty on the engine and 2 Year Warranties on the Pump and Frame!

 

EK or General Pump Triplex Plunger Pump

Inline Serviceable Stainless Steel Mesh Water Filter

Oil Bath Crank Case with dipstick and sight gauge

Stainless Unitized Valves

Forged Brass Manifold

Thermo Pump Protector engages at 140 Degrees F

Adjustable Pressure Regulator from 150psi to max

Fully Welded Powder Coated Steel Frame

Phone: 833.400.0774
Espanol: 800.917.9274

Read More

Zebra stripping and can be caused from 4 areas of concern.

 

This is called Zebra stripping and can be caused from 4 areas of concern. Flip cover over and check fan Pattern to make sure you are getting full spray

Out of each nozzle.

Sometimes when you connect garden hose to pressure washer you can pick up Debris and will make its way to the nozzle and will cause this issue from partial fan spray coming out.

Remove the nozzle with 9/16 socket and use air compressor or tooth pick And clear orifice of Tips.

Before installing the tips back, Run water through the system/bar until all

Debris are gone then install tips back with cavity line across face of tip runs

Parallel with spray bar.

2nd Cause of issue would be too low of pressure coming from pressure washer

Check the pressure with a gauge to confirm the unit is putting out correct pressure.

3rd Cause if unit hits anything extruded from ground or roof tops will cause

The Tips to move out of position or damage to bearings wiggle bar

side to side to see if excessive play Make sure cavity line of tips are parallel with bar.

4th cause of issue If system hits anything from rocks to extruded areas will cause 1

of the spring loaded seats to move out of position and allow pressure to Escape out

and around seat and cut the small o-ring and  back up nylon seal and will lose pressure

through weep hole at  Bottom of cover. Will need to replace seal kit.

Surface Cleaner 

833.400.0774

Espanol: 800.917.9274

Read More