GX690-Hot Water Pressure Washer

This unit has the right features to assure you can tackle all types of applications at any location. Factory Option setup for 2-trigger operation with two sets of accessories is available and can be ordered by phone 800-333-9274. Achieve long run times with our 12-gallon diesel and gasoline fuel tank capacity. Powered by Honda GX690 with Electric Key Start - 18 Amp charging system and battery box, make this Water Cannon pressure washer wholly self-contained. Durable Heavy-Duty US made steel frame with corrosion resistant coating, forklift accessible for easy removal or installation. A 3V X belt drive system powers a low RPM General Triplex TSF2021 Pump, providing balanced power transfer for continuous duty. Factory tested multi-point QC inspection to ensure reliability and performance.

The dependable Wayne burner delivers a 130-degree Fahrenheit water temperature increase: maximum 210 degrees Fahrenheit, and a highly efficient US made schedule 80 coil with a molded combustion chamber delivers hot water within seconds. Wayne burner is designed for applications where an AC power source is not an option. The Wayne burner uses a suitable cad cell flame sensor to control the motor, igniter, and solenoid valve. Interrupted duty ignition extends battery life by only drawing full load current during the ignition period. Continuous duty ignition is also available. Available with a pump-mounted solenoid blocking valve that delivers smoother light-offs and cleaner shutdowns. The SDC burner is conveniently powered by a standard 12 Volt direct current power supply.

A Laser Aligned 3VX belt drive system provides balanced power transfer for continuous duty. Factory tested multi-point QC inspection to ensure reliability and performance.

Built-in safety features, such as a Rupture Disk, Safety Pop-off Valve, pressure relief valve safeguards the pressure washer and operator. While the thermo-sensor valve prevents pump from overheating in bypass mode. Standard user-friendly features include easily accessible Adjustable PAC Thermostat, Flow Switch and a block mounted Unloader Bypass Valve.                                                                                                     

Hot Water Pressure Washing Applications include cleaning vehicles, equipment, vent-hoods, concrete, houses, trucks, fences, decks, buildings, parking lots, drive pads, condensers, marinas, car lots, operating surface cleaners, roof cleaning, skid steer, chicken houses, rail yards, or hog farms we have you covered. Ready to mount on an open trailer, enclosed trailer, van, truck body or truck bed. Attach it to a garden hose or a mobile water supply tank and Blast away with your Water Cannon.

More info: 800.917.927

Español: 800.917.9274

#powerpressurewashing #industrialcleaning #pipes

#commercialcleaning #farms #roofcleaning

 #carlots #parkinglots #trucks #concrete #marinas

 

Read More

Heating Coil

 

Water Cannon hot water pressure washers feature a unique heating coil that are made with State of the Art machinery and technology. This starts with custom ordered lengths of coil pipe that can be up to twice as long as other brands, reducing the need for extra welds.

 Our fusion welding process achieves 100% pipe penetration for stronger pipe to pipe cohesion. The pipe is then drawn through a state of the art, 11 axis pipe maneuvering coil rolling machine that will provide zero bend restrictions. The whole coil can be rolled at one time, including the "pancakes" that are structurally braced with steel rod to eliminate vibration.

 For additional structural support each layer is welded to the next to totally do away with friction and pipe wear.

It is this unique coil design with increased surface area allows for faster heat transfer and also prevents hot-spots, since there are no bend restrictions. 

Thus, the water is heated evenly and quicker than most competitor models. Additionally, Water Cannon units have been paired with the best factory recommended burner to efficiently control fuel combustion that allows for a greater number of BTUs than other pressure washers, resulting in faster heating times with better heat transfer.

See more: click here 

Read More

Hot Water Trailer 3000PSI 16GPM Mounted Sewer Jetter

 

Water Cannon’s 16 gpm - 3000 psi (48,000Effective Cleaning Units) hot water sewer drain cleaning machines are highly effective tools that can be used in a county school district for various commercial plumbing applications. With the system assembled on a nicely equipped dual-axle over the road D.O.T. approved trailer, convenient key-start and a 500 gallon water reservoir tank this hot water jetter is self-contained, ready to clear up the problems and keep things running smoothly down the drain.

Here are some of the common uses: 

·  Clearing Clogged Drains: These machines are specifically designed to remove tough clogs and blockages in sewer drains. "Best Practices" use high-pressure hot water jets to break up and flush away debris, grease, and sludge, ensuring efficient drainage in school facilities.

·  Preventive Maintenance: Regular maintenance of sewer drains is crucial to prevent costly and disruptive plumbing issues. With a 16 gpm 3000 psi and adjustable hot water up to 200 degrees F and Pulsation-on-demand. These drain cleaning machines, the school district can proactively clean and inspect sewer lines, identifying potential problems before they escalate.

·  Removing Tree Roots: Tree roots can infiltrate sewer lines, causing blockages and damage. These powerful machines can effectively cut and clear tree roots, restoring proper flow in the drainage system. Specialty nozzles are available with features that help break up tree roots and other obstacles.

·  Cleaning Grease Traps: Commercial kitchens in schools often have grease traps that require regular cleaning with hot water. The high-pressure hot water jets of these drain cleaning machines can effectively remove grease buildup, preventing clogs and maintaining proper functioning of the traps. Grease traps can generate flammable and toxic gases over time. These gases can include methane (natural gas), hydrogen sulfide, carbon monoxide, carbon dioxide, and/or other gases depending on the greases, oils, and fats found in the grease traps. https://www.osha.gov/sites/default/files/publications/OSHA3986.pdf 

·  Emergency Services: In the event of a sewer line backup or severe clog, a 16 gpm 3000 psi drain cleaning machine can quickly address the issue, minimizing disruption to school operations and ensuring a safe and sanitary environment for students and staff. Water Cannon sewer drain cleaning machines installed on a D.O.T. approved trailers are essential tools for maintaining the plumbing infrastructure in a county school district, ensuring efficient drainage, and preventing costly plumbing emergencies.

·  Pressure Washing: When it is time to clean up, the Water Cannon Jetter doubles as a pressure washer system and comes complete with all of the conversion accessories. 

 

☎ 833.400.0774 - 800.917.9274

Read More

How to Locate a Leak

 

• Let's walk through the steps to identify a leak in your  Hot Water Pressure Washer.

• 1. **Safety First:** Before starting, make sure your pressure cleaner is turned off and disconnected from any power source. Ensure the washer is cool to avoid accidental burns and wear protective gloves for safety.

• 2. **Inspect the Pressure Washer:** Start with a visual inspection of your pressure washer. Look out for any obvious signs of leakage like puddles under the unit or dripping water.

• 3. **Hose Inspection:** Inspect the hose for any signs of wear, crack, or cut. These are common areas where water can leak. Also, check the connection points between the hose and the pressure washer. If the leaks are coming from here, it might simply be a case of tightening up your connections.

• 4. **Check the Pump:** The pump is another possible source of leakage. Pumps can often leak due to worn seals which can be replaced if needed. If the pump is severely damaged, you may want to consider replacing the entire pump.

• 5. **Inspect the Gun:** Check the spray gun, particularly where it connects to the hose and the nozzle. Reattach or replace these parts if you see water leaks.

• 6. **Examine the Connections:** Finally, examine the water connections on the machine, including where water enters and exits the machine. Hot water washers typically have seals which can wear out over time leading to potential leak.

• If you've followed these steps and are still having trouble locating your leak or if the issue persists after replacing the necessary part(s), don't hesitate to contact a professional or  customer service for further assistance. Remember, when dealing with equipment like a hot water pressure washer, safety should always be your main priority.

Read More

Water Cannon hot water 4000psi pressure washer

 Step-by-Step guide on safely using a Water Cannon hot water 4000psi pressure washer for historic building restoration applications:

Materials and Tools Needed:

- Water Cannon hot water 4000psi pressure washer
- Protective clothing, safety glasses, and gloves
- Scaffolding or lift (if needed)
- Extension wand (if needed)

Steps:

1. Safety First: Always wear protective clothes, including safety glasses and gloves, when operating a pressure washer. The high-pressure jet can cause serious injuries.

2. Prepare the Pressure Washer: Make sure to read the operator’s manual before you start the pressure washer. Understand the correct operation, the controls, and safety measures.

3.  Inspect the Building: It's crucial to evaluate the building's condition before pressure washing. Look for any signs of weak masonry, cracks, or loose bricks. Areas where mortar is crumbling should also be identified. These zones might need gentler pressure or handheld cleaning.

4. Get Permission: Historic buildings usually fall under specific protection laws. Always check the laws and get necessary permissions before you begin cleaning.

5. Test on a Small Area: Use the 4000psi pressure washer on a small, less noticeable area first to make sure it doesn't cause any damage.

6.  Avoid Direct Angles: Never direct the pressure washer jet perpendicular to the surface. Instead, aim at a 45-degree angle. This rule helps to prevent the displacement of mortar and ensures less abrasive interaction with the surface.

7. Maintain a Safe Distance: Always maintain a safe distance from the building. Aim to keep about six to twelve inches away from the wall. Be sure to step back if the pressure seems too intense to prevent damage. 

8. Use an Extension Wand: For high areas, use an extension wand instead of a ladder when possible. It can be dangerous to operate a pressure washer from a ladder due to the force of the back spray.

9. Work from Top to Bottom: Start at the top of the building and work your way down. This method allows the dirty water to run down the wall, so you're not spraying over previously cleaned areas which allows for an even clean.

10. Continuous Movement: Keep the spray moving. If you keep it in one area for too long, you could cause damage especially considering the high PSI of the Water Cannon hot water pressure washer.

11. Use Hot Water Carefully: Hot water can be very effective, but it must be used carefully on delicate surfaces. It can help to dissolve tough grime and can make the cleaning process quicker.  At the end of this process, your historic building should be clean, preserving its architectural integrity. Remember, when in doubt, always seek professional help. Historic buildings are sensitive, and incorrect pressure washing could lead to irreversible damage.

Call us at 833.400.0774 

Español: 800.917.9274

Read More

Hot Boxes

 Hot boxes do not have a starter or engine. 

The power supply is 120 volt plug in the wall

Or

12 volt with a battery that charges itself from the diesel burner and 

converts to 12 volt as a power source.

Phone: 833.400.0774

Read More