Using a pressure washer

 

Using a pressure washer can be dangerous if proper safety precautions are not taken. Here are a few examples of "dumb" ways someone could get hurt while using a pressure washer:

• Pointing the nozzle at someone: The high-pressure water stream can cause serious injury or even death if it hits someone in the face or chest.

• Not wearing proper eye and ear protection: The high-pressure water stream can cause damage to the eyes and ears if proper protection is not worn.

• Not properly securing the hose: If the hose is not properly secured, it can whip around and cause injury to the person using the pressure washer or to others nearby.

• Using a pressure washer on an unstable surface: If the person using the pressure washer is standing on an unstable surface, they could slip or fall, causing injury.

• Not properly maintaining the pressure washer: If the pressure washer is not properly maintained, it could malfunction and cause injury.

• Using a pressure washer on electrical equipment, or near electrical sources, without making sure everything is properly grounded and isolated.

• Using the pressure washer for cleaning chemicals or flammable liquids, which can cause an explosion or fire hazard.

Phone: 833.400.0774
Español: 800.917.9274

Read More

Why Use 93 Octane Gasoline?

 

**Importance of Using 93 Octane Gasoline in Water Cannon Pressure Washers with Overhead Valve Honda Engines & Issues with Ethanol**

Using the correct type of fuel for your pressure washer is a crucial element to ensure its optimal performance. This tutorial will explain why it is recommended to use 93 octane gasoline in your Water Cannon pressure washer fitted with an overhead valve Honda engine, as well as address the problems associated with ethanol.

**Why Use 93 Octane Gasoline?**

1. **Improved Performance**: Higher octane gas like 93 octane can better withstand high compression before igniting, which is optimal for engines like those found in Water Cannon pressure washers that run at high compression ratios. Improved compression leads to more power output and better engine efficiency.

2. **Protects Engine**: Additionally, use of high octane fuel helps prevent 'engine knocking' or 'pinking', which is premature fuel ignition in the combustion chamber. This is crucial to maintain the health of the engine and to avoid damages.

3. **Enhanced Lifespan**: Regularly using 93 octane gasoline can also help in extending the life of your engine. By reducing 'knocking' and running more efficiently, your engine will experience less wear and tear over time, leading to a longer engine life.

**What's the Issue with Ethanol?**

Ethanol-blended fuels are common, but they can create problems when used in engines like those in Water Cannon pressure washers:

1. **Decreased Performance**: Ethanol contains less energy per gallon than gasoline, which can result in decreased performance and reduced fuel economy.

2. **Potential Damage**: Ethanol is a solvent and can loosen debris lodged in fuel systems, leading to clogs. It may also cause corrosion in the fuel system, leading to further engine damage.

3. **Water Attraction**: Ethanol attracts moisture. This can cause phase separation in the gas tank where water saturates the ethanol and sinks to the bottom of the tank, leading to serious engine problems.

To ensure the performance and extend the lifespan of your overhead valve Honda engine, it's advisable to use 93 octane gas and minimize the use of ethanol-blended fuels. Always refer to your engine's manual for the manufacturer's recommendations on fuel types and proper usage.

Call us at: 833.400.0774
Espanol: 800.917.9274

Read More

Dumb ways to get hurt with a pressure washer

 

Using a pressure washer can be dangerous if proper safety precautions are not taken. Here are a few examples of "dumb" ways someone could get hurt while using a pressure washer:

1.Pointing the nozzle at someone: The high-pressure water stream can cause serious injury or even death if it hits someone in the face or chest.

2.Not wearing proper eye and ear protection: The high-pressure water stream can cause damage to the eyes and ears if proper protection is not worn.

3.Not properly securing the hose: If the hose is not properly secured, it can whip around and cause injury to the person using the pressure washer or to others nearby.

4.Using a pressure washer on an unstable surface: If the person using the pressure washer is standing on an unstable surface, they could slip or fall, causing injury.

5.Not properly maintaining the pressure washer: If the pressure washer is not properly maintained, it could malfunction and cause injury.

6.Using pressure washer on electrical equipment, or near electrical sources, with out making sure everything is properly grounded and isolated.

7.Using the pressure washer for cleaning chemicals or flammable liquids, which can cause an explosion or fire hazard.

8.Refuelling the gas powered engine while the engine is still running which can cause a flash fire. 

9.Accidentally touching the muffler during operation or while the engine is still hot can cause a servers burn. 

10.Making a repair to the pump plumbing using low pressure pipe fittings. 

11.Wearing open toe shoes or flip flops can leave the operator prone to slip and fall. High pressure should never come in contact with any body part or exposed skin. Non slip work boots are recommended. 

It's important to always read the instruction manual and follow the manufacturer's recommendations for safe use and operation of the pressure washer. 

Phone: 833.400.077

Espanol: 800.917.9274

Read More

Rotating nozzles, also known as turbo nozzles, can be significantly

  Rotating nozzles, also known as turbo nozzles, can be significantly faster than regular pressure washer nozzles when it comes to cleaning certain types of surfaces. This is because they use a spinning action to create a more intense and concentrated stream of water that is better able to remove paint stripping, dirt, grime, mold, and other types of unwanted buildup.

The 25 degree spinning action of the nozzle causes the water to rotate and create a fan like spray pattern, that can cover larger area in less time. This fan-like spray pattern can also be adjusted to focus more on the surface to be cleaned for a more intense clean of a zero degree blast nozzle.

The pressure washing speed increase can vary depending on the type of surface being cleaned, the size of the surface and other factors like pressure, water flow and nozzle orifice size. However, it is safe to say that, generally, rotating nozzles can clean surfaces 4 times faster than regular nozzles, due to the more intense and concentrated stream of water they produce.

Keep in mind that Rotating nozzles tend to have a much higher price point, and may not be appropriate for all cleaning task. They may also wear out faster than a standard nozzle, because of the mechanical component that spins, so they may need more maintenance. Rotating nozzles are rebuild-able.

When using a rotating nozzle always point the nozzle down towards the floor before engaging the trigger. Always wear protective safety gear when using your Water Cannon rotating nozzle.

833.400.0774

Espanol: 800.917.9274

#commercialcleaning #pressurewashing #powerwashing 

Read More

How to maintain a soap injector on a pressure washer

 

To maintain a soap injection on a pressure washer, follow these steps:

1. Make sure the pressure washer is turned off or unplugged before performing any maintenance.
2. Locate the soap injection system, which is typically found near the outlet of the high pressure pump.
3. Remove the chemical intake hose and filter to ensure they are free of obstruction or dried soap residue. 
4. Inspect the nozzle or injector for any clogs or blockages. If you find any, use a small brush or needle to clear them out.
5. Check the hoses and connections for any leaks or damage. If any are found, replace them as necessary.
6. Turn on the pressure washer and test the soap injection system using the large orifice black soap nozzle to make sure it is working properly.
7. Repeat these steps on a regular basis to ensure that the soap injection system is always in good working order. 

It's also important to note that you should always use the correct type of soap for your pressure washer, as using an incorrect soap can damage the machine or make it less effective.

Read More

Avoid cheap imitation color-coded nozzles

Water Cannon nozzles last 1000-2000 hours

The lifespan of a pressure washer nozzle can vary depending on several factors, including the quality of the nozzle, the type of use, and the conditions in which it is operated. Under normal conditions, with regular maintenance and proper usage, a Water Cannon pressure washer nozzle can last anywhere from several hundred to several thousand hours of use.

However, nozzles can wear out faster if they're exposed to poorly filtered intake water or subjected to rough treatment on the exterior surfaces of the nozzle. Most importantly the nozzle orifice must be clear of debris. When nozzle clogs are not removed the force of the pressure will unevenly wear the nozzle dramatically reducing its lifespan. 

Regularly inspecting and cleaning nozzles, select the correct orifice size and using the appropriate fan nozzle for the job can greatly prolong the life of the nozzle. In general it is advisable to have spare nozzles on hand, so that when there is a clog or signs of uneven spraying you can quickly replace it and stay focused on finishing the pressure washing task. 

 

Read More

Water cavitation is a phenomenon that can occur in a pressure washer…

 

Always use a commercial grade garden hose with a three-quarter inch non-collapsible internal diameter. Having adequate water supply is the first step in avoiding damaging pressure washer cavitation.

 Water cavitation is a phenomenon that can occur in a pressure washer when the water pressure is too high. It occurs when the pressure of the water is reduced to the point where it can no longer hold dissolved gases in solution.

These gases then come out of the solution in the form of bubbles, which can collapse and implode with great force, creating microscopic vacuum pockets or low-pressure areas. These vacuum pockets can damage the most durable metals including stainless steel.

 The sudden collapse of these bubbles, or cavities, generates intense pressure and heat, which can erode the surfaces they come into contact with. It is most common near the nozzle, in the pump and in the pressure washer hose.

Cavitation can cause damage to the pressure washer's pump internal valves, seats, packings, plungers, spray nozzle, and other components. Cavitation can also reduce the effectiveness of the cleaning.

To avoid cavitation, it is important to use the appropriate pressure setting for the task at hand, and ensure that the water supply is adequate to meet the demands of your Water Cannon pressure washer.

Phone 833.400.0774

Espanol: 800.917.9274

Read More

Extending the life of your HONDA GX engine

 

The Honda GX 390 is a powerful, reliable engine commonly used in a variety of applications, including powering pressure washers, generators, and pumps. To ensure that your engine runs smoothly and lasts for a long time, it's important to properly maintain it.

Here are some steps you can take to maintain your Honda GX 390 engine:

1- Check the oil level regularly: The oil level in your engine should be checked at least once a month, or before each use if the engine is used frequently. The oil should be filled up to the upper level mark on the dipstick. If the oil level is low, add oil to the proper level. It's also important to use the correct type of oil, as specified in your engine's owner's manual.

2 - Change the oil regularly: The oil in your engine should be changed every 100 hours of use or annually, whichever comes first. Old oil can contain contaminants that can damage your engine, so it's important to change it regularly to ensure your engine runs smoothly.

3- Keep the air filter clean: The air filter in your engine prevents dirt and debris from entering the carburetor. Over time, the filter can become dirty, which can restrict airflow to the engine and reduce its performance. The air filter should be checked and cleaned every 25 hours of use or annually, whichever comes first.

4- Check the spark plug: The spark plug is responsible for providing the spark that ignites the fuel in the engine. Over time, the spark plug can become fouled or worn, which can cause engine misfires or difficulty starting. The spark plug should be checked and cleaned or replaced as needed.

5 - Keep the cooling system clean: The cooling system in your engine keeps the engine from overheating. Over time, dirt and debris can accumulate in the cooling system, which can restrict airflow and reduce the engine's performance. The cooling system should be checked and cleaned regularly.

6- Check the valve clearances: As per instructions in the manual, check and adjust the valve clearances periodically. It is recommended to check them every 600 hour of use or annually. This is to maintain the engine performace and reduce the wear on the valve train.

By following these simple steps, you can keep your Honda GX 390 engine running smoothly and extend its lifespan. It's also important to refer to your engine's owner's manual for specific maintenance instructions, as well as any

Phone: 833.400.0774 

troubleshooting or repair information.

Read More

How to pressure wash

 Pressure washing, also known as power washing, is a quick and effective way to clean a variety of surfaces, including your home's exterior, deck, driveway, and more. If you're new to pressure washing, it's important to follow some basic guidelines to ensure

 the best results and avoid damaging the surface you're cleaning.

Here's a step-by-step guide to pressure washing:

1. Clear the area of any obstacles or debris. This will make it easier to move around and avoid tripping, and it will also prevent debris from getting caught in the pressure washer and potentially damaging it.

2. Set up your pressure washer. This will involve connecting the hose, attaching any nozzles or attachments, and filling the machine with water. Refer to the manufacturer's instructions for specific details on how to do this.

3. Test the pressure washer on an inconspicuous area to ensure it's working properly and to see how it affects the surface you're cleaning. This will help you determine the right pressure and distance for the job.

4. Begin pressure washing the surface, starting at the top and working your way down. Use a sweeping motion and overlap each pass to ensure even coverage. Avoid holding the nozzle in one spot for too long, as this can damage the surface.

5. Rinse the surface thoroughly with clean water to remove any remaining dirt or debris. This will also help to prevent streaks and spotting.

6.Allow the surface to dry completely before applying any sealers or other treatments.

Phone: 833.400.0774

Read More

prevent storm-water pollution

 

Pressure washing can be good for the environment in some situations. For example, pressure washing can remove harmful substances such as mold, mildew, and algae from surfaces, which can help prevent them from spreading and causing damage to the environment. Pressure washing can also help to remove dirt and other debris from surfaces, which can help to prevent stormwater pollution.

However, it is important to use pressure washing responsibly in order to minimize any negative impact on the environment. For example, it is important to use biodegradable detergents and to avoid washing chemicals or other harmful substances into storm drains or bodies of water. Additionally, it is important to avoid using too much pressure, as this can damage surfaces and cause excess water runoff.

Overall, pressure washing can be good for the environment when it is done responsibly and in the right situations. It is important to use it wisely and to consider the potential environmental impacts before using it.

833.400.0774

Español: 800.917.9274

Read More

Ways that organic farms use pressure washers

Organic farms can use pressure washers in several ways:

1. Cleaning and sanitizing equipment: Pressure washing can be used to effectively clean and sanitize equipment and tools used in organic farming such as tractors, plows, and harvesters. This helps to maintain the integrity of the organic certification by removing dirt, debris, and other contaminants that may have been introduced to the farm from non-organic sources.
2. Cleaning barns and coops: Pressure washing can be used to clean barns and coops, helping to maintain a healthy environment for animals by removing dirt, debris, and other contaminants that can harbor disease-causing organisms.
3. Maintaining irrigation systems: Pressure washing can be used to maintain irrigation systems such as drip lines, hoses and nozzles that can become clogged with dirt and debris. It can help to keep the systems running efficiently, reducing water waste and increasing crop yields.
4. Preparing soil: Pressure washing can be used to remove debris and rocks from soil prior to planting, helping to improve seed germination and crop yields.
5. Removing weeds and pests: Pressure washing can be used to remove weeds, pests and other unwanted plants from the farm. It can be an effective alternative to chemical herbicides.

It is important to note that when using a pressure washer on an organic farm, it is crucial to use an appropriate cleaning solution that is approved for use in organic production, and to rinse the surfaces thoroughly to avoid any harm to the crops, soil, and other living creatures on the farm.

833.400.0774

Se habla Español: 800.917.9274

 

Read More

Hose Reel Pressure Washer

 HOS-HR150HP-U-BLK

Rated to handle up to 5000 PSI, this heavy-duty reel is built to withstand the high pressures and demands of professional power washing applications. The reel features a Super Swivel, a long life, easy-to-use design, making it simple to wind and friction brake to unwind the hose as needed.

The durable pre-drilled base and powder coated steel construction ensures that this reel will last for years to come. The reel also features a locking pin mechanism that keeps the hose securely in place, preventing it from unraveling during use or while in transit.

This reel is ideal for both commercial and professional use, making it a versatile option for any hot or cold water power washing needs.

To use a 150 hose reel with a pressure washer, you will need to follow these steps:

1. Unpack the hose reel and attach it to the pressure washer trailer, work truck or wall mounted according to your application requirements.
2. Attached a 5000 PSI jumper hose to the reel and connect to the pressure washer hose.
3. Carefully wind or unwind the hose from the reel before pressurizing.
4. Hold the trigger gun of the pressure washer and start cleaning.
5. When you are finished using the pressure washer, release the trigger, turn off the power and water supply.
6. Carefully rewind the hose onto the reel.
   

Note: Always make sure the water pressure and temperature are appropriate for the task and the equipment you are using.

Phone: 800.917.9274

Read More

Maintaining your pressure washer

Maintaining your pressure washer is important for a number of reasons. First and foremost, regular maintenance will ensure that your pressure washer continues to work properly and efficiently. This means that it will be able to clean surfaces effectively and efficiently, without wasting water or energy.

Another reason to maintain your pressure washer is to extend its lifespan. By regularly cleaning and replacing worn parts, you can prevent major problems from developing that could ultimately lead to the need for a new pressure washer. This can save you money in the long run, as well as the hassle of having to replace your pressure washer prematurely.

Maintaining your pressure washer can also help to prevent accidents and injuries. A well-maintained pressure washer is less likely to experience sudden malfunctions, such as hose bursts or loss of pressure, which can be dangerous. Regular maintenance can also help you to identify and fix potential problems before they become serious.

Finally, maintaining your pressure washer is important for the environment. A well-maintained pressure washer will use less water and energy, which can help to reduce your carbon footprint and conserve natural resources. This can be especially important if you use your pressure washer frequently or for large cleaning tasks.

In conclusion, maintaining your pressure washer is essential for ensuring its proper function, extending its lifespan, preventing accidents and injuries, and protecting the environment. By regularly cleaning and replacing worn parts, you can keep your pressure washer in good working condition and ensure that it continues to serve you well for years to come.

 

Catalog: Pressure Washer PARTS & ACCESSORIES

Phone: 800.917.9274

Read More