will the unloader have the pressure preset?

 

ZWD4040 Comet Pump Triplex 4 GPM 4000 PSI - includes an unloader, thermal relief valve, quick connect, chemical injector siphon hose, and garden hose inlet with stainless steel filter - 1 inch hollow shaft and universal fits Honda, Kohler and Lifan engines.

Question; When I receive my pump will the unloader have the pressure preset?

• The unloader is not set exactly. 
• The factory uses a default setting that is close to the performance of the 4000psi pump.

• It is not a dependable default setting. 
• Please always check the oil level and start the unloader in the counter-clockwise setting until you can test the system. 

• You can increase the pressure by manually turning the adjustment knob clockwise until you reach the desired load on the engine. 
• Do not exceed 4200psi. 

PDF VTR3 Unloader Click Here

Call us: 800.333.9274

Espanol: 800.917.9274

Read More

The unloader is on backwards which caused the failure.

• Unloader is backwards which caused the failure, This also poses a risk to the operator.

• There is no bypass 

Caution when installing a regulator, if not installed correctly it can cause valve covers to explode and damage the valves.

Phone: 800.333.9274

Español: 800.917.9274

Read More

Unloader Valves

 

Unloader valves are essential components that regulate pressure and protect the pump from damage. Explore our selection from trusted brands including:

• Landa: Offering high-quality and reliable valves.
• Excell: Known for their efficient and durable designs.
• Troy-Bilt: Providing dependable and effective solutions.

Features and Benefits:

• Pressure Regulation: Ensures optimal performance.
• Pump Protection: Prevents damage and extends lifespan.
• Reliable Performance: Essential for maintaining your pressure washer.

Disclaimer: AllPressureWashers.com is not affiliated with the manufacturers or brands listed on this site. All trademarks, service marks, and company names are the property of their respective owners and are used solely for identification purposes.

833.400.0774

800.917.9274

Read More

The unloader valve

 

An adjustable pressure feature for a pressure washer is highly valuable because it allows the user to adjust the amount of pressure being applied to the surface being cleaned. This can be particularly useful in situations where the user needs to clean a surface that is delicate and can be damaged by high pressure, such as a car or a wooden deck. By being able to adjust the pressure, the user can ensure that they are using the right amount of pressure to effectively clean the surface without causing any damage. Additionally, an adjustable pressure feature can also help the user save water and power, as they can reduce the pressure when cleaning less dirty surfaces, which in turn reduces the amount of water and power needed to clean the surface effectively.

Phone: 833.400.0774
https://www.watercannon.com/product/10021/mecline-vrt3-310ez-unloader-4500psi-replacement-bypass-valve 

 

Read More

ADJUSTING THE PRESSURE-Activated UNLOADER

                  

  pulsar/vrt3 and all pressure trapped

1. the adjusting nut is tightened to increase bypass pressure and loosened to decrease bypass pressure.

2. start with the machine off and the adjusting nut loosened (no tension on the spring). make sure the spray tip is correct for the volume (gpm) and operating pressure (psi).

3. install a pressure guage on pump discharge side of the pump head, or at the outlet where the pressure washer hose attaches.

4. start the machine with the trigger gun closed, the unit will bypass all the water flow from the unloader valve to the pump inlet.

5. with the machine running and the trigger gun now held open, adjust the unloader adjusting nut until the machine reaches the correct operating pressure per the machine specifications            (gpm and psi).

6. pull and then release the trigger gun several times, watching the guage and determine the spike pressure is no more than 200 psi above the operating pressure. adjust as necessary. tighten the lock nut to make the adjustment permanent.

7. make sure the spray tip is correct. remember to adjust the pressure spike to no more than 200 psi over the operating pressure.

8. tip changes – a green spray tip only indicates that it is a 25 degree tip. the tip size is the importan indicator. a 5.6 gpm machine at 35oo psi requires a # 6 tip size. the tip size is laser cut below the color coded plastic nozzle protector. a 2506 is correct for 5.6gpm@3500psi. Phone:833.400.0774 español: 800.917.9274 

Read More